NL-30

Jet Rice Polisher

It is a durable Second Pass Jet Rice Polisher.
Features

MODEL: NL- 30
SECOND PASS
ONE BREAK SYSTEM, A SPECIAL DESIGN FOR INDONESIA.
SUPPORTED WITH THREE BEARINGS ON THE MAIN SHAFT.
JET RICE POLISHER

The most important consideration in the economics of rice milling is the recovery and broken rice percentage. TAKA YAMA JET POLISHER has been throughly tested and consistently proven to be the best rice milling machine of its kind. An increase in recovery and decrease in broken rice is guaranteed over whatever type of polisher you may have.
The development of this JET POLISHER has been due to two important factors. The need of a machine to give the largest yield of whole rice in view of the paramount importance of this staple commodity to the Asian people. The second facotr stems from the excellence of the engineers at TAKA YAMA AGRICULTURE MACHINERY COMPANY. They have been instrumental in the development of many superb
TAKA YAMA MACHINES.

THE SPECIAL FEATURES OF TAKA YAMA "TRIPLE BEARINGS SUPPORTED" JET RICE POLISHER.

1. Constant air injection into the polishing chamber during the whole polishing process guarantees the total elimination of bran and maintains the rice down at low temperature avoiding possible breakage.
2. The main shaft is supported with three bearings so the machine will operate more stable which decrease breakage of the polished rice and increase milling yield.
3. High yield of pure, whole polished rice is assured because the rice meets the polisher surface without any pressure applied, so breakage is negligible.
4. The polishing degree is adjustable as required by adding or retracting the resisting weight on the outlet plate by means of the balance weights.
5. Durability of parts subject to wearing is extremely high. The milling chamber screen has been heat treated and the roll is made of exceptoionally hardened steel.
6. The inner frame rotated during operation so that it will not be blocked by wet bran.

Specification

TAKA YAMA RICE POLISHER

MODEL NL-30

POWER REQUIRED

25HP~30HP

CAPACITY/HOUR

2500~3000kgs

R.P.M.

700~750

Machine Dimensions
LxWxH mm

1300x450x980

NET WEIGHT

330 kgs

STANDARD SPARE PARTS :

1.Screen.......................1 set
2.Pressure Plate............1 set
3.Inner Cylinder..............1 pc.
4. Milling Roller..............1 pc.
5. Screwed Iron Roller....1 pc.
6.Inner Frame...............1 pc.
7.Bolt...........................1 pc.
8.Pinion........................1 set
9.Tools.........................1 set
10.Instruction Manual.....1 pc.
Other Description
Power Corn Thresher/ Rice Grader/ Rice Husker.